How to copy a DVD-9 movie?

Copy with the Express interface

Step 1: Insert source

DVD into DVD drive and run DVD-Cloner. Two copy modes "To DVD-5" and "To DVD-9" will appear on its interface. You can copy source DVD-9 movie to either 4.7G or 8.5G DVD±R/RW.

Step 2: Click on the Start button and DVD-Cloner begins to read data. After the reading completes,the driver ejects automatically.

Insert target DVD±R/RW and DVD-Cloner starts to copy. 10 minutes later, the copying completes.

 



Copy with the Expert interface

Step 1: Select source

Please click on the drop-down bar and select the correct DVD driver or DVD burner.

Then the information of source DVD will be displayed in the info box.

Step 2: Select target

Please click on the drop-down bar and select the correct DVD burner. Or you can click the button to select the output path on hard drive to copy the movie to your computer.

Step 3: You can select any one of the four copy modes



A Perfect 1:1 DVD copy

Brings you an excellent burning experience! The copied disc will remain 100% same to the original, no quality loss!



B Copy a DVD movie to a DVD±R/RW. Under this copy mode, you can select movie only copy, which can remove menu and special features.





C Customized copy: Under this mode you can make customized copy: copy your desired chapter(s) or adjust the compression rate, etc.

D Split one DVD-9 to two or more DVD-5s. Under this copy mode you can copy a DVD movie to two or more DVD-r/rw



Step 4: Start copying.



Before the copying starts, some detailed information will be displayed in the info window and you can define the number of discs to be copied. After the copying completes,you can enjoy the backup of your original movie!